Products


filters out ingredients, barrel char, fine carbon particles, flies, and more during transfer and bottling

designed to be compatible with the high alcohol content of spirits

can also be used to protect heat exchangers

operates up to 100C/212F

will not stain or cross contaminate flavors  –  simply rinse before switching from one type of spirit or recipe to another

1.5″ trim-clamp or 1″ NPT connectivity

includes 950 micron/20 mesh, 304 micron/50 mesh, 40 micron/50 x 250 mesh screens and pipe thread

very easy to clean compared to frame and plate filters

doubles as an infuser

embossed arrow indicated direction of flow

can also be used by brewers in hot side applications

to clean, wash in gentle detergent (avoid oxy cleaners), dip in sanitizer (do to soak), and let air dry

Model:    Bouncer ProD – BIF005

Application:    Inline Filtration

Connectivity:   Stainless steel 1.5 inch tri-x`clamp and 1″ NPT female

Screens:   Red 20 mesh (950 micron), Blue 50 mesh (304 micron), and Black 50 x 250 mesh (40 micron)

Filter Area:   29.73 square inches (19,181 square mm)

Max operating temperature: 100 C/212 F

Weight:    1 pound, 9.6 oz. / .73kg (with tri-clamp adaptors and black screen)

Accessories included:   Stainless steel tri-clamp adaptors, roll of pipe thread tape, three screens (see above)

Country of origin:  U.S.A.

Dimensions:   (see drawing)

Materials:   (see product drawing)     

 1 – top: black, 20% glass filled polypropylene

 2  – bowl: black, 20% glass filled polypropylene

 3 – gasket:   EDPM

two-pack mini beer infusers

infuse your beer by the growler, pitcher or glass to test recipes and create variety

educate your palate on hop types, punch up bland batches!

250 micron / 60-mesh screen infuses flavor without the dregs

easy to use: just fill up Growler Bro up to half way with ingredients of choice (don’t add fermentables…growlers may explode!), add to your growler or container, fill and agitate to remove any trapped air, then cap

 
Model:    Growler Bro (2  pack)  –   BIN001
 
Application:   Infusion in growler, pitcher or glass
 
Screen:    250 micron / 60 mesh
 
Max Operating temp:    65C / 150F
 
Weight:    0.02kg / 0.04lb (each)  
 
Country of Origin:   U.S.A.
 
Dimensions:   (see drawings above)
 

Materials:   (see product drawing)     

 1 – screen:   304 stainless steel and polypropylene

 2 – two plugs:  food grade silicone

Check out this great review at Craft Beer & Brewing: Editor’s Picks – https://beerandbrewing.com/editors-picks-spring-flings/

filters out dry hops, fruit, yeast, etc during tank-ro-tank
transfers or kegging to produce better tasting
and clearer beer

multiple units can be easily used in series
(coarse then fine screens) or parallel (for faster flow rates)

very easy to clean compared to frame and plate filters

doubles as an infuser

Model:    Bouncer Pro  (sku# BIF004)

Application:    Inline Filtration

Connectivity:   Stainless steel 1.5 inch tri-clamp and 1″ NPT female

Screens:   Red 20 mesh (915 micron), Blue 50 mesh (304 micron), and White 80 mesh (178 micron)

Filter Area:   29.73 square inches (19,181 square mm)

Max operating pressure:   up to 150 psi at 21 C / 70 F and 100 psi at 52 C / 125 F

Weight:    1 pound, 8 oz. / .69kg (with try-clamp adaptors and white screen)

Accessories included:   Stainless steel tri-clamp adaptors, roll of pipe thread tape, three screens (see above)

Country of origin:  U.S.A.

Dimensions:   (see drawing)

Materials:   (see product drawing)     

 1 – top:   white nylon

 2  – bowl:   clear nylon

 3 – gasket:   EDPM

perfect for five-gallon batches of beer
removes sediment
no taste-spoiling aeration or chemicals
saves time and beer
no pump required
easy to clean

Bouncer Product Review: Clements Homebrew

Model:    Classic Bouncer  (sku# BIF001)

Application:    Inline Filtration

Connectivity:   3/8″ hose barbs

Screen:   915 micron /  20 mesh

Filter Area:   4,974 square mm  /  7.71 square inches

Max Operating temperature:   65C  /  150F

Max Operating pressure:   up to 150 psi at 21 C / 70 F

Weight:   .064kg  /  .14 lb

Accessories included:   none

Optional Accessories:   RSA001 replacement screen assortment (includes red 20 mesh and blue 50 mesh screens)

Country of origin:   U.S.A

Dimensions:   (see drawing)

Materials:   (see product drawing)     

 1 – top:   white nylon

 2  – bowl:   clear nylon

 3 – screen:   304 stainless steel and polypropylene

 4 – gasket:   EDPM

perfect for large batches and dry hopped beers
doubles as a “mini randall”
removes sediment
no taste-spoiling aeration or chemicals
saves time and beer
no pump required
easy to clean

 Bouncer Product Review: “Bouncer MD keeps the dregs out of my keg!”

Model:    Bouncer MD  “Mac Daddy” model  (sku# BIF002)

Application:    inline filtration, infusion at tap

Connectivity:   1/2″ NPT female,  1/2″ hose barbs,  3/8″ hose barbs

Screen:   915 micron /  20 mesh

Filter Area:   11,161 square mm  /  17.3  square inches

Max Operating temperature:   65C  /  150F

Max Operating pressure:   up to 100 psi at 52 C / 125 F

Weight:   .17 kg  /  .38 lb (without house barb adaptors)

Accessories included:   two 3/8″ hose barb adaptors, two 1/2″ hose barb adaptors

Optional Accessories:   RSA002 replacement screen assortment (includes red 20 mesh and blue 50 mesh screens)

Country of origin:   U.S.A 

Dimensions:   (see first drawing)

Materials:   (see product drawing)     

 1 – top:   white nylon

 2 – bowl:   clear nylon

 3 – screen:   304 stainless steel and polypropylene

 4 – gasket:   EDPM

 

 

 

 (sku# RSA001)

one blue 304 micron/50-mesh screen
one  white 178 micron/80-mesh screen

 (sku# RSA002)

one blue 304 micron/50-mesh screen
one  white 178 micron/80-mesh screen

Replacement Gaskets for Classic Bouncer – 5 Pack
(sku# BRG001)

Replacement Gaskets for Bouncer MD – 5 Pack
(sku# BRG002)

Replacement Gaskets for Bouncer Pro- 5 Pack
(sku# BRG003)

Replacement Nylon Bowl for Classic Bouncer
(sku# RNB001)

 

Replacement Nylon Bowl for Bouncer 
(sku# RNB002)

 

Replacement Nylon Bowl for Bouncer Pro
(sku# RNB003)